Virtually indestructible anti-slip nosings for stairs & steps and a tough cost effective permanent slip resistant solution for step edges


Safety Edge anti-slip stair nosing has been developed as a cost effective, long term solution to the Disability Discrimination Act and in particular, the sections relevant to the partially sighted. The Act requires all stairs be accessible by members of the public, should have a contrasting coloured nosing fitted to the step edges and in addition should provide a slip resistant top surface.

The nosing with chamfered edge can be fitted to almost any step without creating a trip hazard. Even when being fitted to landings and extra deep steps, its unique design provides a secure solution.

Cut to size option available, please contact us for prices

  • Chamfered back edge to minimise trips
  • Anti-slip top surface in 2 grades – a fine grade aggregate for internal or coarse for external applications
  • Hard wearing & durable fibreglass, resistant to stretching, warping and swelling
  • 55mm x 55mm sixe is DDA and Building Regulations compliant
  • Choice of 2 colours – white and yellow
  • Choice of 2 sizes – 70mm x 30mm and 55mm x 55mm
  • Quick and easy installation
  • Ideal for high traffic areas
  • Photoluminescent option available


    Safety Edge 70mm x 30mm                            Safety Edge 55mm x 55mm

Safety Edge 70 x 30              Safety Edge 55 x 55

COARSE Pendulum Slip Test Values
  85 – Extremely low slip potential    65 – Extremely low slip potential




FINE Pendulum Slip Test Values
  69 – Extremely low slip potential    59 – Low slip potential





  Surfaces   concrete, wood or metal
  Interior/Exterior   interior or exterior


Surface Preparation

Ensure that the area is clean, dry and free from loose material. Safety Edge should be cut in a well ventilated area or close to extraction points. Dust residue can be disposed of using normal waste disposal methods. Any “dished” or damaged surface areas should be patch repaired with Eli-Patch Epoxy Repair Mortar to provide a reasonably flat and consistent surface, GRP Adhesive Mastic will take up minor undulations and imperfections. 


Dry fit all Safety Edge profiles to ensure they fit freely and that they sit flat down on the surface. If required, Safety Edge can be trimmed on site to suit, ideally using a hacksaw or an angle grinder with a 1mm standard metal blade. Please ensure that goggles and gloves are worn at all times when any form of cutting is involved. We recommend a double fixing method for installing the Safety Edge. This consists of an appropriate high strength GRP Adhesive Mastic and GRP screws.  

All substrates: Apply a 6mm bead of the GRP Adhesive Mastic around the edge of the underside of the nosings, approx. 25mm in from the edges. Then apply the mastic in a zig zag pattern across the whole length of the nosing. Immediately press the panel firmly to the substrate to ensure adequate transfer of adhesive. Secure with mechanical fixings, as below.

Screw fixing: Hold the GRP in place and drill holes approximately 50mm in from each edge and thereafter at approximately 300–400mm intervals through the panel and into the substrate. A rawl plug will probably be required in a concrete base. Dependant on the substrate it may be necessary to increase or decrease this spacing.


Write a review

Note: HTML is not translated!
    Bad           Good

Safety Edge GRP Anti-Slip Stair nosing

  • Product Code: FMSEGRP
  • Availability: In Stock
  • £16.74

  • Ex Tax: £13.95

Available Options

Related Products

Eli-Safe Heavy Duty Anti Slip  GRP Sheet

Eli-Safe Heavy Duty Anti Slip GRP Sheet

4mm thick heavy duty, anti slip GRP flat sheets with a resin bonded anti slip surface, they are..

£112.80 Ex Tax: £94.00

Box of 30 screws for GRP

Box of 30 screws for GRP

Box of 30 screws. Ideal for the installation of Eli-Safe GRP Products ..

£8.40 Ex Tax: £7.00

GRP Adhesive Mastic 310ml

GRP Adhesive Mastic 310ml

FixMaster GRP Adhesive Mastic 310ml Cartridge, ideal for fixing and bedding Eli-Safe GRP products ..

£8.57 Ex Tax: £7.14

Eli-Safe GLOW Anti Slip Step Covers

Eli-Safe GLOW Anti Slip Step Covers

Photoluminescent non slip GRP step cover for added safety in the dark, with DDA compliant ..

£43.20 Ex Tax: £36.00

Safety Edge GRP GLOW Anti-Slip Stair nosing

Safety Edge GRP GLOW Anti-Slip Stair nosing

 Virtually indestructible GLOW anti-slip nosings for stairs & steps and a tough cost e..

£19.14 Ex Tax: £15.95

Heavy Duty Line Marking Tape

Heavy Duty Line Marking Tape

A fast solution for social distance marking, Heavy duty self adhesive floor marking tape has a uniqu..

£66.66 Ex Tax: £55.55

Tags: Safety Edge GRP, anti slip steps, slip-resistant, Anti Slip Stair Nosings, Anti Slip Nosings, Anti Slip Stair Treads