Due to a worldwide shortage of epoxy resin we are currently out of stock of this product

Epoxy Paint WB Anti Slip is a water based, solvent free epoxy resin coating system with pre-dispersed lightweight aggregates which provide a hard wearing, durable high sheen finish. The finely textured surface is both attractive and easy to keep clean


Excellent abrasion, wear and chemical resistance. Ideal for industrial or commercial floors, vehicle maintenance bays, garages, laboratories, showrooms, schools, plant rooms and food & beverage production areas.

  • Durable with good chemical resistance
  • Easy to use and easily cleaned
  • Non toxic
  • Hygienic
  • Can be used over existing coatings
  • Low odour


Pendulum Slip Test Values
  65 – Low slip potential    46 – Low slip potential






  Surfaces   concrete, wood
  Interior/Exterior   interior
  Curing time   24-36 hours @ 15°C
  Primer required?   very porous surfaces should be sealed with Epoxy Floor Prime WB before pouring the resin
  Coverage   5-6m² per kg per coat (2 coats recommended for a uniform finish)
  Pot Life   30-60 minutes @ 15°C
  Shelf life and Storage   one year in sealed containers. Do not allow to freeze.


Surface Preparation

New concrete should be at least 4 weeks old, surfaces should be clean and dry. Smooth or new concrete should be mechanically abraded. Grease, oil and other contamination can be removed using FixMaster Master Bio-Clean or similar degreasant. FixMaster Epoxy WB Anti-Slip can be applied over existing coatings but they must be well bonded and lightly abraded. Wooden surfaces should be abraded to remove dirt (two or three coats may be required of porous wooden surfaces). Not recommended for use on metal or most latex levelling compounds. 



Mix the two components individually before decanting the smaller container into the larger. Add the measured amount of water (1 ltr for 5 ltr kit / 2 ltrs for 10 ltr kit) and mix thoroughly for 3-5 minutes using a wide bladed tool or slow speed drill. Work around the sides and base to ensure all of the liquid is mixed and the aggregate is evenly dispersed. Once that the product is of an even consistency and uniform colour the product is ready to decant and apply. Decant into a shallow tray ready for application. 



One coat will act as a priming and sealing coat. The second coat will provide a uniform attractive finish and can be applied as soon as the first coat is dry. Application is best in temperatures between 15-25°C with a medium pile simulated sheepskin roller. Re-stir the paint at regular intervals to ensure even distribution of the aggregate. Do not apply to a floor temperature below 5°C and avoid washing the floor for 7 days. 


Technical Data Sheet (PDF)                             Safety Data Sheet MSDS (PDF)


Write a review

Note: HTML is not translated!
    Bad           Good

Epoxy Paint WB Anti Slip 5L

  • Brand: FixMaster
  • Product Code: FM/WBAS
  • Availability: Out Of Stock
  • £91.20

  • Ex Tax: £76.00

Available Options

Related Products

Epoxy Paint 100 High Build 5L

Epoxy Paint 100 High Build 5L

SPECIAL OFFER ON MID GREY and MID BLUE…..ONLY £45 +VAT Epoxy Paint 100 is a hi..

£86.40 Ex Tax: £72.00

Epoxy Floor Prime WB 5L

Epoxy Floor Prime WB 5L

Due to a worldwide shortage of expoxy resin we are currently out of stock of this product A speci..

£76.80 Ex Tax: £64.00

Tags: epoxy paint WB anti slip, anti-slip paint, epoxy resin floor coating, chemical-resistant, non-slip