Due to a worldwide shortage of epoxy resin we are currently out of stock of this product

A self smoothing, hygienic, ultra glossy epoxy floor coating laid at 2-4mm thick, just mix and pour for a seamless showroom standard floor


Excellent abrasion, wear and chemical resistance. Ideal for industrial or commercial floors, food & beverage production areas. hospitals, garages, laboratories, showrooms, schools and plant rooms.

  • Hygienic – easy to keep clean
  • Smooth glossy finish
  • Extremely hard wearing with good abrasion resistance
  • Good oil and chemical resistance
  • 100% solids epoxy formula
  • Solvent free and virtually odourless



  Surfaces   concrete, wood or metal
  Interior/Exterior   interior
  Curing time   at 20°C the area can be opened to light traffic after 24 hours
  Primer required?   very porous surfaces should be sealed with Epoxy Prime 100 before pouring the resin
  Coverage   20kg pack will cover 6-7m² @ 2mm depending on the substrate
  Pot Life   40 minutes
  Shelf life   one year in sealed containers


Surface Preparation

In all cases surfaces should be clean, dry, sound and free from any oil or contaminants. Thorough preparation is required to ensure maximum performance. Concrete should ideally be mechanically abraded to remove surface laitance. If this is not possible the surface should be treated with FixMaster Acid Etch Cleaner and allowed to thoroughly dry before coating. Grease or oil should be removed with FixMaster Master Bio Clean and the area washed off and allowed to dry. New concrete should be at least 28 days old with a moisture content of less than 6%.


Mix the two components individually. Pour the smaller container into the larger and thoroughly mix for 3-5 minutes using an electric drill and mixing paddle, or wide bladed tool, working around the sides and base so all liquid is incorporated to ensure thorough and complete mixing. Once the product is an even consistency and uniform colour decant into a shallow tray ready for application. 


Best results are obtained in ambient temperatures of 15°C or above. Pour the mixed Smooth Flow on to the prepared surface and spread evenly to the desired depth of 2-4mm using a notched squeegee. Within approximately 5-10 minutes, apply a spiked roller to remove air bubbles and repeat a few minutes later and thereafter until the air bubbles have gone.


Technical Data Sheet (PDF)                             Safety Data Sheet MSDS (PDF)


Write a review

Note: HTML is not translated!
    Bad           Good

Epoxy Smooth Flow 20kg

  • Product Code: FMESMSL
  • Availability: Out Of Stock
  • £156.00

  • Ex Tax: £130.00

Available Options

Related Products

Eli-Patch Epoxy Repair Mortar

Eli-Patch Epoxy Repair Mortar

Eli-Patch Epoxy Repair Mortar is a high strength, quick setting repair mortar many times stronger th..

£32.40 Ex Tax: £27.00

Concrete Floor Leveller 25kg

Concrete Floor Leveller 25kg

Our industrial concrete floor leveller has 33% greater compressive strength than most concrete ..

£49.20 Ex Tax: £41.00

Tags: seamless, hygienic coating, self levelling coating, self smoothing coating, epoxy screed, hygienic epoxy coating