There is a 10-14 day lead time on all Rust-Oleum products due to COVID-19, we apologise for the inconvenience

Rust-Oleum CombiColor Orginal is the ultimate one coat system for metal protection.

Rust-Oleum CombiColor Metal coating is a primer and topcoat in one, based on a urethane modified alkyd, providing good drying properties at low temperatures. The product contains rust-inhibitive pigments and is lead and chromate free.

Ideal for interior and exterior use on bare metal, manually de-rusted metal or previously painted surfaces. Rust-Oleum CombiColor has excellent coverage and sag resistance, leaving no brush or roller strokes, and provides good drying properties even at low temperatures. Rust-Oleum CombiColor is a one coat maintenance system for metal, providing superior metal protection, even when applied direct to rust. It remains flexible and does not become brittle or flake with movement. Rust-Oleum CombiColor is intended for brush and roller application and can also be applied by air spray.

Over 400 RAL, BS & NCS colours are available to order, please call us for information.

Recommended use
CombiColor Original is intended for brush and roller application and can also be applied by air spray. Rust-Oleum Combi Color Original 7300/7400 offers corrosion protection in a light industrial environment. For metal structures in a more aggressive industrial environment, prior application of a Rust-Oleum Combi Primer Anti-Corrosion 3369/3380 is recommended.

  • Primer and topcoat in one
  • High coverage: 10.5 m² per litre
  • Sag resistant, no brush strokes
  • Usable down to 5°C
  • Apply to bare, manually derusted or ready primed mild steel
  • Interior/exterior use
  • Over 400 colour options including RAL, BS & NCS – just give us a call to order.
  • Use Rust-Oleum 3302 CombiPrimer Adhesion first on bare galvanised zinc and aluminium

Application video for Rust-Oleum CombiColor

 

Specifications

  Surfaces   mild steel & cast iron
  Interior/Exterior   exterior or interior
  Drying time   at 20°C touch dry in 2 hours, dry to handle in 8 hours, overcoat after 16 hours
  Coverage   10.3 m² per litre
  Shelf life   five years in sealed containers, if stored in dry, well ventilated areas
  Min. app. temp.   +5°C

 

Surface Preparation

Remove oil, grease and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. Remove rust scale, loose mill scale, loose rust and loose coatings by scraping and wire brushing to St 3 (ISO 8501-1 : 1988), light blast cleaning or sanding. Sand intact coatings to roughen the surface slightly. The surface must be clean and dry during application. Galvanised, Zinc and Aluminium surfaces have to be primed first with CombiPrimer Tack Coat 3302.

Mixing

Mix thoroughly using a wide bladed stirrer.

Application

Temperature of air, substrate and coating material between 5° and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point.

Application & thinning: brush
Up to 10% volume RUST-OLEUM Thinner 7301. Use natural bristles, long hair brushes.

Application & thinning: roller
Up to 10% volume RUST-OLEUM Thinner 7301. Use short nap, polyamide 6-12 mm rollers. Roller application may require 2 coats to achieve recommended dry film thickness.

Application & thinning: Air-atomised spray
10-25% volume RUST-OLEUM Thinner 7301. Gravity cup and pressure cup. Tip size: 1.0 - 1.5 mm. Atomising pressure: 2 - 4 bar.

Technical Datasheet (PDF)
Safety Data Sheet SDS (PDF)
CombiColor Colour Chart

Write a review

Note: HTML is not translated!
    Bad           Good

Rust-Oleum CombiColor Original Gloss

  • Brand: Rust-Oleum
  • Product Code: RO-CCOG
  • Availability: In Stock
  • £18.36

  • Ex Tax: £15.30


Available Options