There is a 10-14 day lead time on all Rust-Oleum products due to COVID-19, we apologise for the inconvenience

Rust-Oleum Noxyde Peganix Single pack water-based elastic coating, optimized for brush or roller application

Peganox is a heavy duty, water based paint, excellent on all metal substrates including metal roofs and also plastisol cladding. It forms an elastomeric flexible anti-rust membrane. The membrane is impermeable to water and highly resistant to weathering, as well as mechanical and chemical attack. It is extremely good in harsh environmental areas such as coastlines and also industrial areas.

Recommended use
Anticorrosive protection on ferrous and non-ferrous metals.

  • Good corrosion protection and waterproofing
  • Smooth aesthetic satin finish
  • 200% elastic coat does not crack or peel
  • Excellent flow, ideal for roller/brush application
  • Primer and topcoat in one
  • UV and impact resistant
  • Thinner coating than Noxyde giving a lower cost per m²



  Surfaces   ferrous metals and non-ferrous metals
  Interior/Exterior   interior & exterior
  Drying time   at 20°C touch dry in 1 hour, overcoat after 6 hours, fully cured in two days
  Coverage   depends on porosity & roughness of the substrate but as a guide:-
  2 coats of minimum 200 g/m² (5 m²/kg)
  Shelf life   two years in sealed containers, if stored in dry, well ventilated areas
  Min. app. temp.   8°C


Surface Preparation

Apply the usual derusting procedures (min. Sa 2 sand blasting, min. St 2 steel brush, etc.) orby high-pressurewater (min. 600 bars). Dedust well after sand blasting.


Mix thoroughly prior to use.


Temperature between 8 and 55°C. Air humidity max. 80% R.H. The substrate temperature must be at least 5°C above dewpoint. When used inside, provide for adequate ventilation. During work stoppage, fully immerse brush or nozzle in water, empty and clean the tubes.On non-ferrous substrates, use PVDF Primer or Pegalink as adhesion primer first.

Application & thinning: brush
Apply undiluted

Application & thinning: roller
Apply undiluted

Application & thinning: Airless spray
Undiluted. Nozzle: 11 - 13 / Pressure: min. 220 bars. Diluted with maximum 3% volume of water.

Application & thinning: Air-atomised spray
Apply undiluted

Technical Datasheet (PDF)
Safety Data Sheet SDS (PDF)
Noxyde Brochure

Write a review

Note: HTML is not translated!
    Bad           Good

Rust-Oleum Mathys Noxyde Peganox 5kg

  • Brand: Rust-Oleum
  • Product Code: RO-MNP
  • Availability: In Stock
  • £51.48

  • Ex Tax: £42.90

Available Options

Tags: Noxyde Peganox is a heavy duty, water based paint, excellent on all metal substrates including metal roofs and also plastisol cladding. eleastomeric