FixMaster High Strength Epoxy Resin Adhesive is a two component epoxy which has been especially developed with exceptionally strong bonding properties for a variety of substrates, including ceramic, steel, metallics, concrete, aluminium, steel, rubber, plastics and cementitious grouts. It is very easy to use, with a simple 1 to 1 mix ratio (by weight). It will cure in ambient temperatures with a non-flowing, easy to control viscosity.

• 1kg kit (500g resin & 500g hardener)
• Non-flammable
• Specific Gravity mixed system 1,05g/cm3
• Viscosity/25C° mixed system semi thixotropic paste (33000 m Pa.s)
• Heat resistance: 70°C continuous exposure
• Adhesion to Steel > 10 MPa
• Adhesion to Ceramics 12 MPa

Typically Cured Properties Hardness after 24 hours:- Shore D80 Tensile Strength:- 17 MPa Impact withstandgt:- >5 Kj/m Flexural Stregth:- >20 MPa Compressive Strength:- 70 MPa Water Absorption:->1% immersed for 24 hours Chemical Resistance:- Fully impervious (when cured) to oils, dilute acids, inorganic compound, alkalis, saltwater, petrol, benzine and alcohol

Specifications
Surfaces: ceramic, steel, metallics, concrete, aluminium, steel, rubber, plastics & cementitious grouts
Mix ratio: 100 parts resin to 100 parts curing agent by weight
Gel time: 50-60 minutes
Curing time: 2 hours
Coverage: 1 kg covers 1m²
Pot Life: 20-30 minutes @ 25°C
Shelf life: one year in sealed containers

Mixing
Mix components together until a uniform viscosity is achieved.

Application
For best results use a brush, spatula or trowel.

Download TDS

Download SDS