This reflective tape is ideal for application to posts, gates, walls and vehicles in poorly lit areas.

• Shines brightly when caught in any light path
• High quality vinyl for a waterproof surface
• Ideal for barriers, gates, fences, wall edges, etc.
• Top quality pressure sensitive adhesive
• Easy fast application
• High quality, high performance
• Each roll is approx 10m long and 50mm wide

Specifications
Surfaces: concrete, timber, brick, stone and metal
Interior/Exterior: interior or exterior
Curing time: ready for traffic immediately
Primer required?: yes on dusty, porous or gritty surfaces
Roll length: each roll is approx 10m long
Roll width: 50mm

Surface Preparation
Ensure the surface is clean, dry and free of contamination.

Application
Peel back part of the release liner then press the adhesive firmly onto the prepared surface, and slowly keep peeling back the liner while applying the tape. Ensure that the tape is not taut. Mould the conformable grade into place around any undulations using a non marking rubber mallet.