Typical applications include driveways, car parks, cycle paths and footpaths. Revive-A-Drive?seals fine cracks and voids in the surface course, preventing further damage from frost and water ingress. \n

• Please note this product should be applied to surface temperatures above 10°C
• Helps protect against frost damage
• Restores asphalt to its original new appearance
• Fills small cracks in tarmac

Application video for Revive-A-Drive Aphalt Binder

Specifications
Surfaces:   asphalt surfaces
Interior/Exterior:  exterior
Drying time: 2 - 4 hours at 15 - 25°C, Traffic after 24 hours
Coverage: 5L covers approximately 10 - 20m², depending upon the surface texture
Shelf life: one year in sealed containers

Surface Preparation
The surface should be clean , dry and free from dust. Weather conditions should be dry and above 10ºC.

Application
Revive - A - Drive Asphalt Binder can be applied by soft broom but preferably a coarse textured foam roller available from hardware stores at a spread rate of 1.5 -3m²  per litre, depending upon the texture of the surface. Work the product out well not allowing it to pool. Once the surface is tack free and a uniform black colour is achieved the area can be put back into use. A second coat may be applied if required after the first coat has dried.

Please note that the broom bristles, or roller, will start to stiffen after a while making application more difficult. The finish will initially appear brown but dry to a uniform black colour. Exposed stones in high spots will wear through the coating but this will not effect the penetration and binding process.

Download TDS

Download SDS