Provides a safe surface along with high visibility in hazardous areas and escape routes, an easy and cost effective way to improve safety. Our heavy duty self adhesive anti slip tapes are designed to prevent slips and trips in a variety of environments, widely used on steps, ramps and floors in public areas and industrial factories.

• Tough aluminium oxide grit for great slip resistance and long life
• All rolls are 18.3m long
• Ideal for indicating hazardous areas or safe escape routes
• Wet PTV 71
• Resin bonded aluminium oxide grit on a PVC backing
• Photo-Luminescent option available works with natual and artifiacial light
• Glow version will glow for 10 hours from as little as 30 minutes light

Specifications
Surfaces: concrete, timber, brick, stone and metal
Interior/Exterior: interior or exterior
Curing time: ready for traffic immediately
Primer required?: yes on dusty, porous or gritty surfaces
Roll length: each roll is approx 10m long
Roll width: 50mm

Surface Preparation
Ensure the surface is clean, dry and free of contamination.

Application
Peel back part of the release liner then press the adhesive firmly onto the prepared surface, and slowly keep peeling back the liner while applying the tape. Ensure that the tape is not taut. Mould the conformable grade into place around any undulations using a non marking rubber mallet.