High Strength Epoxy Resin Adhesive 1kg

Description

FixMaster High Strength Epoxy Resin Adhesive is a two component epoxy which has been especially developed with exceptionally strong bonding properties for a variety of substrates, including ceramic, steel, metallics, concrete, aluminium, steel, rubber, plastics and cementitious grouts. It is very easy to use, with a simple 1 to 1 mix ratio (by weight).
It will cure in ambient temperatures with a non-flowing, easy to control viscosity.

• 1kg kit (500g resin & 500g hardener)
• Non-flammable
• Specific Gravity – mixed sysyem 1,05g/cm³
• Viscosity/25°C – mixed system – semi thixotropic paste (33000 m Pa.s)
• Heat resistance – 70°C continuous exposure
• Adhesion to Steel –  > 10 MPa
• Adhesion to Ceramics – 12 MPa

Typically Cured Properties
Hardness after 24 hours:- Shore D80
Tensile Strength:- 17 MPa
Impact withstandgt:- >5 Kj/m²
Flexural Stregth:-  >20 MPa
Compressive Strength:- 70 MPa
Water Absorption:->1% immersed for 24 hours
Chemical Resistance:- Fully impervious (when cured) to oils, dilute acids, inorganic compound, alkalis, saltwater, petrol, benzine and alcohol