Epoxy Paint WB Anti Slip is a water based, solvent free epoxy resin coating system with pre-dispersed lightweight aggregates which provide a hard wearing, durable high sheen finish. The finely textured surface is both attractive and easy to keep clean

FREE DELIVERY TO UK MAINLAND

Excellent abrasion, wear and chemical resistance. Ideal for industrial or commercial floors, vehicle maintenance bays, garages, laboratories, showrooms, schools, plant rooms and food & beverage production areas.

Durable with good chemical resistance
Easy to use and easily cleaned
Non toxic
Hygienic
Can be used over existing coatings
Low odour

Pendulum Slip Test Values
Dry PTV	Wet PTV
65 – Low slip potential	46 – Low slip potential

Specifications
Surfaces	concrete, wood
Interior/Exterior	interior
Curing time	24-36 hours @ 15°C
Primer required?	very porous surfaces should be sealed with Epoxy Floor Prime WB before pouring the resin
Coverage	5-6m² per kg per coat (2 coats recommended for a uniform finish)
Pot Life	30-60 minutes @ 15°C
Shelf life and Storage	one year in sealed containers. Do not allow to freeze.

Surface Preparation

New concrete should be at least 4 weeks old, surfaces should be clean and dry. Smooth or new concrete should be mechanically abraded. Grease, oil and other contamination can be removed using FixMaster Master Bio-Clean or similar degreasant. FixMaster Epoxy WB Anti-Slip can be applied over existing coatings but they must be well bonded and lightly abraded. Wooden surfaces should be abraded to remove dirt (two or three coats may be required of porous wooden surfaces). Not recommended for use on metal or most latex levelling compounds.

Mixing

Mix the two components individually before decanting the smaller container into the larger. Add the measured amount of water (1 ltr for 5 ltr kit / 2 ltrs for 10 ltr kit) and mix thoroughly for 3-5 minutes using a wide bladed tool or slow speed drill. Work around the sides and base to ensure all of the liquid is mixed and the aggregate is evenly dispersed. Once that the product is of an even consistency and uniform colour the product is ready to decant and apply. Decant into a shallow tray ready for application.

Application

One coat will act as a priming and sealing coat. The second coat will provide a uniform attractive finish and can be applied as soon as the first coat is dry. Application is best in temperatures between 15-25°C with a medium pile simulated sheepskin roller. Re-stir the paint at regular intervals to ensure even distribution of the aggregate. Do not apply to a floor temperature below 5°C and avoid washing the floor for 7 days.

Technical Data Sheet (PDF) Safety Data Sheet MSDS (PDF)